Protective Building Systems

Refinery Control Rooms

Standard Features

Blast Criteria

  • 5, 8, and 10 psi (freefield overpressure)
  • Medium damage (ASCE damage criteria)
  • 12’ x 40’ and 14’ x 40’

Electrical

  • 220/120VAC Single Phase main Panel
  • 150A main breaker
  • 120V/20amp duplex receptacles
  • MC Cable with ground
  • Penetrations
    1. 1. 2 – ¾”
    2. 2. 2 – 1-1/2”
    3. 3. 2 – 2”
  • Ground lug posts
  • 4’ fluorescent lay-in fixtures
  • Three way light switches
  • Emergency LED egress lighting with two directional beams
  • Class 1 Div 2 exterior lighting

Connection

  • CAT5e cabling
  • RJ45 comm/data jacks

HVAC

  • Class 1 Div 2 wall mount with aux heat, 120/240V Single Phase – Dual CSA & UL certified
  • Wall mounted thermostats

Exterior Doors

  • 3’0” x 7’0” blast rated doors
  • Equal to or greater than building blast requirements
  • Universal door closer
  • Yale mortise lock with lever set hardware

Insulation

  • Spray Polyurethane Foam (SPF) Thermal Insulation
  • R30 on ceilings (R40 – optional)
  • R25 on walls and floors

Interior

  • Metal stud and track framing
  • Vinyl coated Drywall with batten strip, Hampton Grey
  • Vinyl cove base, Blue Grey
  • Acoustical ceiling
  • Tongue & groove dry ply sub floor
  • Injection molded, homogeneous, solid vinyl interlocking tile floor
  • 3’0” x 7’0” solid core doors with jamb and locksets

Exterior Finish

  • Sand blasted to near white finish
  • Paint system that meets C5-I standard for highly corrosive environments in accordance with ISO standards

Lifting

  • lifting lugs on each corner for equal center of gravity
  • safety lugs on roof